What are the processing steps involved in making liquid glucose for food?

Jul 23, 2025Leave a message

As a supplier of Liquid Glucose for Food, I am often asked about the detailed processing steps involved in its production. In this blog post, I'll walk you through the entire process, from raw materials to the final product that is widely used in the food industry.

Step 1: Selection of Raw Materials

The first and most crucial step in making liquid glucose for food is the selection of high - quality raw materials. Generally, starch is the primary raw material. Starch can be sourced from various grains such as corn, wheat, and potatoes. As a supplier, we always ensure that the starch we use is of food - grade quality, free from any contaminants or impurities. This is because the quality of the raw material directly impacts the quality of the final liquid glucose product.

Step 2: Starch Liquefaction

Once the raw starch is obtained, the next step is liquefaction. This process involves breaking down the starch molecules into smaller fragments. First, the starch is mixed with water to form a slurry. Enzymes, usually alpha - amylase, are then added to the slurry. Alpha - amylase acts on the starch molecules, breaking the alpha - 1,4 - glycosidic bonds. This results in the conversion of starch into shorter chains of dextrins.

The slurry is then heated to a specific temperature, typically around 85 - 95°C, to activate the enzyme and speed up the reaction. The pH of the slurry is also carefully adjusted to an optimal level for the enzyme activity, usually around pH 6 - 7. This step is critical as it determines the initial breakdown of the starch and sets the stage for the subsequent steps.

Step 3: Saccharification

After liquefaction, the dextrins obtained are further broken down into glucose molecules through a process called saccharification. Another enzyme, glucoamylase, is added to the liquefied starch solution. Glucoamylase acts on the dextrins, cleaving the remaining alpha - 1,4 and alpha - 1,6 - glycosidic bonds, releasing individual glucose units.

The saccharification process is carried out at a lower temperature than liquefaction, usually around 60°C, and at a slightly acidic pH of about 4 - 5. The reaction time for saccharification can vary depending on the desired degree of conversion. A longer reaction time generally leads to a higher glucose content in the final product.

Step 4: Filtration

Once the saccharification process is complete, the solution contains a mixture of glucose, unreacted dextrins, enzymes, and other impurities. Filtration is then carried out to remove these unwanted substances. The solution is passed through a series of filters, such as plate - and - frame filters or membrane filters. These filters can remove insoluble particles, enzyme residues, and any other large - sized impurities from the solution.

Step 5: Decolorization

After filtration, the liquid glucose solution may still have a slight color due to the presence of pigments or other colored substances. Decolorization is performed to improve the appearance of the final product. Activated carbon is commonly used for this purpose. The activated carbon has a large surface area and can adsorb the colored impurities from the solution.

The liquid glucose solution is mixed with activated carbon and then stirred for a certain period. The mixture is then filtered again to remove the activated carbon along with the adsorbed impurities. This step helps to produce a clear and colorless liquid glucose product, which is more appealing for food applications.

Step 6: Ion Exchange

Ion exchange is an important step in the purification of liquid glucose. During the previous steps, various ions such as calcium, magnesium, and chloride ions may be present in the solution. These ions can affect the quality and stability of the liquid glucose. Ion exchange resins are used to remove these unwanted ions.

There are two types of ion exchange resins: cation exchange resins and anion exchange resins. Cation exchange resins remove positively charged ions, while anion exchange resins remove negatively charged ions. The liquid glucose solution is passed through columns filled with these resins, and the ions are exchanged with hydrogen or hydroxide ions, resulting in a purer solution.

Step 7: Concentration

After purification, the liquid glucose solution has a relatively low solids content. To obtain a more concentrated product, the solution is concentrated through evaporation. The solution is heated under reduced pressure in an evaporator. This allows the water in the solution to evaporate at a lower temperature, reducing the risk of thermal degradation of the glucose.

The evaporation process continues until the desired solids content is achieved. The final liquid glucose product typically has a solids content of around 70 - 80%. This concentrated form is more suitable for storage, transportation, and use in the food industry.

Step 8: Quality Control and Packaging

Before the liquid glucose is ready for market, strict quality control measures are implemented. Various parameters such as glucose content, moisture content, color, odor, and microbial count are tested. Only products that meet the strict quality standards are approved for sale.

Once the product passes the quality control tests, it is packaged in suitable containers. Depending on the customer's requirements, the liquid glucose can be packaged in drums, tanks, or smaller bottles. The packaging is designed to protect the product from contamination and ensure its stability during storage and transportation.

Use of Food Additives

In some cases, certain food additives may be used in the production of liquid glucose for food to improve its quality and stability. For example, Tri - Sodium Phosphate Dodecahydrate can be used as a buffering agent to adjust the pH of the solution. It helps to maintain the stability of the product during storage and processing.

Another additive that may be used is Butylated Hydroxytoluene USP. It is an antioxidant that can prevent the oxidation of glucose and other components in the liquid glucose, extending its shelf life.

Conclusion

The production of liquid glucose for food is a complex multi - step process that requires careful control and attention to detail at each stage. From the selection of high - quality raw materials to the final packaging, every step plays a crucial role in ensuring the quality and safety of the product.

As a supplier of Liquid Glucose for Food, we are committed to producing the highest - quality liquid glucose that meets the strictest food industry standards. If you are interested in purchasing our liquid glucose products or have any questions about our production process, please feel free to contact us for further discussion and negotiation.

Liquid Glucose 2Liquid Glucose

References

  • A. J. van der Maarel, et al. "Properties and applications of starch - converting enzymes of the alpha - amylase family." Journal of Biotechnology, 2002.
  • P. J. Baker, "Enzymes in Food Processing." Springer, 1997.